Complete clog-free gutter system.
ValueFilter-reported rainfall-handling rating for the complete system.
Review system specifications ↗GUTTER PROTECTION. RE-ENGINEERED.VALUEFILTER ELITE / GEN 03
Gutter Guards
Installation
Built around the path of water.
Designed for the home you love.
01 / FiltrationMicro-mesh ↗
02 / EngineeringGen 3 profiles ↗
03 / Performance38 in/hr system ↗
04 / Product detailAssembly details ↗
05 / In the fieldEvery connection ↗
06 / Your homeFind your city ↗
316L STAINLESS STEEL+MICRO-MESH FILTRATION+GEN 3 GEOMETRY+FIT TO YOUR ROOFLINE
VALUEFILTER ELITE 316L GEN 3 / RAINFALL PERFORMANCETwo ratings.
Two ratings.
Two defined scopes.
The complete system and its micro-mesh material have separate reported rainfall-handling ratings. Use the complete-system figure when discussing the installed ValueFilter assembly.
ENGINEERING REFERENCE / CALCULATED ROOF RUNOFFTranslate rainfall
Translate rainfall
into water volume.
Estimate the water falling on a horizontal roof area. This calculation assumes 100% runoff; it does not measure gutter-guard throughput or certify an installed system’s capacity.
VALUEFILTER 316L GEN 3 / INSTALLED ASSEMBLYPrecision.
Precision.
At the roofline.
Original installation photography. Explore the mesh surface, supporting profile and connection details.
02 / DIMENSIONAL REFERENCE GEN 03 · PROFILE STUDY
Gen 3 dimensional drawings.
316L / GEN 3
Standard and Stubby cross-section references for nominal 5″, 6″ and 7″ K-style gutters. Select a drawing and use zoom to inspect the original annotations.
K-style gutter profiles · dimensions and annotations as suppliedVIEW / 100%
Standard 5″, 6″ and 7″ Gen 3 guards require adequate space between the gutter and roofline. Stubby versions fit installations with less clearance. Final configuration follows the installation update and an assessment of your home.
ORIGINAL SCHEMATICS / GEN 3 INSTALLATION UPDATEVALUEFILTER / 01 / MICRO-MESH316L.
316L.
In detail.
A close view of the stainless steel filtration surface and edge interface. Review the assembly before planning the fit.
Request a profile assessment ↗
03 / MATERIALS & ASSEMBLYFiltration surface.
Filtration surface.
Support frame. Water path.
316L stainless steel micro-mesh forms the filtration surface above the gutter.
01 / MICRO-MESH SURFACE
316L stainless steel
The fine mesh surface separates debris from the rainwater path.
Anodized aluminum
The rigid support structure holds the mesh across the gutter opening.
Reverse-curve geometry
The edge profile works with the mesh to guide water toward the gutter.
VALUEFILTER / 02 / CONNECTIONSEvery angle.
Every angle.
Considered.
Original corner assembly photography documents guard continuity at a roof transition.
Request a profile assessment ↗
02 / MATERIALS
Strength in
the details.
316L
Stainless steel micro-mesh.
The filtration layer specified for ELITE 316L Gen 3. A fine mesh surface separates debris from the rainwater path.
01 / FILTRATION LAYERAnodized aluminum frame.
A rigid support structure holds the mesh across the gutter opening. Material and geometry work together as a complete assembly.
02 / SUPPORT STRUCTUREThe complete
assembly.
04 / INSTALLATION REFERENCE
Connections and preparation.
Original photographs document the corner assembly and gutter preparation. Select an image to inspect the detail.
Assess the existing gutter.
Review condition, attachments, pitch, outlets, downspout discharge and roofline clearance.
Prepare the assembly.
Clean gutters and downspouts. Identify sealing, repair or reinforcement work before fitting the guards.
Select the profile.
Confirm nominal gutter size, Standard or Stubby configuration, and the intended installation pitch using the Gen 3 update.
VALUEFILTER / 03 / INSTALLED SYSTEMEngineered
Engineered
for your roofline.
Explore the ValueFilter system, dimensional drawings and installation requirements for your home.
Request a profile assessment ↗
01 / PRODUCT DATA
System specifications.
Product identification and installation parameters for the Gen 3 assembly.
- System
- ValueFilter ELITE 316L Gen 3
- Filtration surface
- 316L stainless steel micro-mesh
- Support structure
- Anodized aluminum frame
- Water guidance
- Micro-mesh + reverse curve
- Reported complete-system rainfall rating
- 38 inches/hour — complete ValueFilter clog-free gutter system
- Reported micro-mesh material rating
- 50 inches/hour — material only
- Standard nominal gutter sizes
- 5″, 6″ and 7″ K-style gutters
- Standard installation pitch
- 20–23°
- Stubby installation pitch
- 8°
- Configuration
- Selected for the gutter profile and available roof-to-gutter clearance
Next stop.
Your home.
Find gutter guards installation in your city. Explore the system, prepare your project brief and request a free estimate for your roofline.
Find my city ↗